Machine Park

X / Y / Z 500 X 450 X 400 mm 5 axis rotary table capacity 12000 rpm direct drive spindle Heidenhain 620 TC operating system Renishaw part with measuring probe

Processing Dimensions : 1055x650×600 10000 rpm direct drive Fanuc control unit Renishaw part with measuring probe 4. Axis with rotary table

Processing Dimensions : 1050x600×530 10000 rpm direct drive Mitsubishi M80 control unit Renishaw part with measuring probe

Processing Dimensions : 1050x600×530 10000 rpm direct drive Mitsubishi M80 control unit Renishaw part with measuring probe

Processing capacity of Ø 320x400 diameter Bar feeder of Ø 52mm diameter

Processing capacity of Ø 320x400 diameter Bar feeder of Ø 52mm diameter

Processing capacity of Ø 250 x 400 diameter Bar feeder of Ø 52mm diameter

Processing capacity of Ø 250 x 400 diameter Bar feeder of Ø 52mm diameter

Processing capacity of Ø 300 x 2000 diameter

Reading accuracy (selectable): 0.0001 / 0.001 / 0.01 / 0.1 mm Length dependent: (1,3 + 0,6 L / 600) mm L = length measure mm Repeat accuracy 2 s): Plane: 0.5 mm

Processing Dimensions: 350 x 250 x 200

Thanks to the speed control in hydraulic equipment, you can set the speed between 0 and 100 rpm and do the operation at the speed you want according to the size of the guide.

All drill models are CE certified. All threats against job security are prevented. Motor, switch, contactors and all electrical materials are CE certificated.